Card Photo Printer CP-300
The Canon Card Photo Printer CP-300 is a very compact, lightweight and portable 4 x 6-inch dye diffusion printer that comes with a rechargeable lithium battery pack. It can be used anywhere without a computer when connected directly to a compatible PowerShot digital camera or any PictBridge enabled digital camera. It can also be connected to a PC via its USB port. The CP-300 produces color prints that equal the sharpness and durability of prints from film negatives. The printer's resolution is 300x300 dpi, more than adequate for a crisply detailed postcard sized image from any 2 megapixel or greater camera, or for credit card size prints from 1.2 megapixel cameras. The dye diffusion color process is a continuous tone printing system that renders subtle shadings and realistic colors. The printer also covers each print with a clear, protective overcoating that protects it from the effects of sunlight and weather. The prints from the CP-300 are at least as durable as photographic prints from film. There are several sizes of media available: Bordered or borderless 4 x 6-inch prints
A60 via the included USB cable.
The CP-300 is a complete printing system in an extremely compact unit. You don't need
to enter data from your PowerShot camera into a personal computer and then into the
computer's printer. A dedicated cable connects the CP-300 to Powershot G5, G3, G2*, S50,
S45, S40*, S30*, SD100, S400, S330, S300*, S200, S110*, A70, A60, A40, A20*, A10*,
A300, A200 and A100. Because all of the
necessary controls and bundled software are already a part of your PowerShot camera,
they aren't necessary on the printer, keeping weight and bulk to a minimum.
(Firmware upgrade may be necessary for this camera model.)
When the camera is connected to the printer there is a "SET" icon in the upper left
corner. You press the SET button to access the Print menu. Here you select the printing
type; standard or multiple, bordered or borderless, with or without a date stamp. Select
the number of copies to make and you can even do a little image cropping because some of
the 4:3 aspect ratio image is going to be lost when printing a 4 x 6-inch (3:2 ratio)
The CP-300 comes with two paper trays, one for 4 x 6-inch media and the smaller one
to handle the credit card size media sheets.
Setup and use is very simple. Open the door on the side, insert the ink ribbon cartridge, close door, load the paper in the tray, open door in the front, insert paper tray, attach battery and connect AC power adapter, plug in USB cable from the camera to the printer and you're good to go!
The camera (or the computer) controls the printer, the only control on the printer is an
On/Off switch. The printer will automatically power down after 5 minutes of inactivity.
The CP-300 comes with the high-capacity NB-CP1L 22.2V 1200mAh Li-ion rechargeable battery
pack. It attaches to the back of the printer and makes it completely portable. A fully
charged battery can produce up to 36 postcard-size 4x6-inch prints. It takes about 150
minutes to fully recharge this battery with the supplied AC power adapter. Because it's
Li-ion the battery can be charged at any time and holds a charge much longer than NiMH
The available paper kits for the CP-300 are:
- Thirty-six 4 x 6 in. sheets of paper and ink ribbon
- Thirty-six 2.1 x 3.4 in. sheets of paper and ink ribbon
- Eighteen credit card size/full label and ink ribbon
- Eighteen credit card size/mini label (8 stickers per sheet) and ink ribbon
Here's examples of the borderless and bordered 4x6" prints with the tear-off tabs
still intact. Credit card size multi and borderless prints and a sticker sheet
print with the eight mini-picture labels.
A. Card Photo Printer CP-300 Body
Latest Printer Reviews