3 Tips for Gang Scanning Photos in Photoshop

If you have old photographs lying around at home, then learning how to scan photos is one of the easiest ways to get them onto your computer. By scanning the photos, you will be able to save them as computer files, which can then be printed and edited until you're completely happy with them.

It is one of the easiest ways of digitizing existing photos. This means that you can scan the photos yourself rather than taking them to a photo shop. Scanning photos is very easy, however, it's very time consuming. This might not be an issue if you're just scanning one or two photos. However, if you have stacks of them, then scanning them can take hours. Gang scanning photos is where the process can be automated. This means that you will be able to leave your scanner scanning photographs until it's finished.

1. Using a Flat Bed Scanner

If you have a regular flat bed, scanner then you might think it's only possible to scan one photo at a time. However, if you use Photoshop CS, then this isn't actually the case. Simply put all of your photographs on the flat bed scanner and scan them as normal. Then, load your image in Photoshop and select File, Automate, Crop and Straighten Photos.

Once you have clicked this option, the software will automatically identify the individual photos and straighten & crop each one. This works very well and is an ideal way of automating and gang scanning photos.

2. Separating Photos

For gang scanning to work well on a flat bed scanner, you must make sure that there is some form of contrast between the different photos. To achieve this, you should leave a gap between each photograph unless it has a different colored border. This will make it much easier for Photoshop to identify the individual photos and deal with them properly.

If the photographs are too close together, then Photoshop will find it very difficult to differentiate the photos. This may mean that you can cram more photos onto the scanner, however, the results won't be as good. Ensure that enough of a gap is left. It doesn't really matter if the images are straight because the software should handle that for you.

3. Using an Automatic Document Feeder

If you have loads of photographs to scan into your computer, then you will find it even easier if you choose a scanner which has an ADF or Automatic Document Feeder. These are not fitted on every scanner, but it is possible to choose them specifically. By choosing an ADF tray option, you can leave a stack of photos on the tray and then it will automatically scan through them all.

This is one of the best and easiest ways of automating the process of scanning large volumes of photographs into Photoshop. By using an ADF tray, you don't even have to crop and straighten the photos. Gang scanning your photos will greatly simplify the process of scanning in multiple photos to Photoshop. This will also make editing them much simpler.

Popular Cameras for High Quality Photos: