Underwater Photography: Tips for Color Contrast to Avoid Flat Pictures

Underwater photography is a great pastime, but it can result in some flat pictures if you're not careful. Learning a few simple tips will make it possible to produce much higher quality photographs, which look much more realistic. Concentrating on contrast in your pictures should make it much easier to create great looking photos which won't look staged.

The main problem with shooting underwater is that light travels differently through water. This means that visibility and contrast will be lost. The lack of contrast will create shots which aren't perfectly clear.

Read through some of these tips and use them next time you decide to take your camera underwater. With a bit of practice, you should find that creating and framing great underwater photos is much easier. Modern cameras are much better at retaining more contrast, but it's still important to find out what you can do to improve your underwater photos.

1. Focus on High Contrast Differences

Your camera works by focusing on areas of high contrast difference. The contrast is the difference in color in the picture. This means that you will get much better results by trying to focus on an area with a high contrast difference. Try setting your camera to "AI Servo Focus Mode," as this will make achieving depth in your photos much easier.

If you are using spot focus mode, then make sure your camera is focusing on an area of high contrast difference. You should be able to determine where the camera is focusing based on the square on the screen.

2. Locking Focus

If you're interested in taking a photo of something which doesn't have a high enough contrast difference, then you could try using focus lock. When you press the shutter down half way, the camera will focus and be locked at that focus until you release the button.

Aim your camera at something with high contrast difference which is about the same distance away as your subject. Then, press the button down half way to lock the focus. After this, move to your subject and press the button down right the way.

3. Distance

Another solution to avoiding the loss of contrast is to get close to your subject. Get up close to your subject so that as little contrast is lost as possible. Ideally try to get within 24 inches of your subject. This may not be possible if you are taking photos of fish because they will swim away.

4. Lighting

Adding additional light sources from flashes or continuous lights will make the contrast of the images much clearer. However, sometimes this will have a problem highlighting sediment which is suspended in the water. This will require some experimentation to ensure that the right lighting is used.

5. Adjustments

After taking your photo, it will be possible to do some minor adjustments using Photoshop or other photo editing software. This software makes it possible to adjust the contrast of the picture and reduce any problems with a flat image.

By following these tips, you should be able to reduce the risk of taking flat underwater photographs. Instead, all of your photos will be high contrast.

Popular Lenses: