7 Tips to Understanding Fill Flash for Underwater Photograpy

Using fill flash techniques can be a useful way to take photos in a wide range of different conditions and situations. Using fill flash can also make it possible to take great underwater shots.

Underwater photography can help to capture some unique photographs that you wouldn't normally see. There are, however, a few problems to overcome. First, you will have to learn how to cope with a lack of light. All photos need light to be taken properly. Underwater there isn't enough light, which creates all sorts of problems. One solution to this problem is to use fill flash. Here are 7 tips to understanding fill flash for underwater photography:

1. Getting as Close as Possible

Light travels differently in water than it does in air. This means that you need to get as close as possible to your subject in order to take good photos. Ideally, try to get within 24 inches of the subject, as this will improve the lighting. Being too far away will create problems because the light won't be able to travel far enough.

2. Aiming the Flash

Experiment with aiming the flash so that you get the right results. Sometimes you might not want to aim the flash directly at the subject depending on the look you are trying to achieve. Filters and diffusers can also be used to feather and soften the light from the flash.

3. Be Patient

Taking photos of any wildlife is very difficult. This is even more true underwater where the animals can quickly swim away. To make taking photos easier, you must be patient. Spend a lot of time where you want to take the photo, and get the animals used to you and your camera. At first, your results probably won't be anything to write home about. However, after some practice it should become much easier.

As the animals become more accustomed to you it should be even easier. You should be able to get some great shots once the animals know that you're not going to eat them. At first, the wildlife will not like the flash, but after some time, they might tolerate it and even pose for you.

4. Take Lots of Photos

Even professional photographers will often have trouble taking underwater photos with a fill flash. This means that you should take many photos of the same subject and location. Once you get back home, it will then be easy to look through them and decide exactly which ones you want to keep.

5. Shooting Upwards

When using fill flash to take a photo underwater, you should shoot looking upwards. This will make the animal look much more realistic and bigger. If you shoot any other way, then the subject might get lost in the background.

6. Additional Lighting

Don't just rely on a single fill flash to take photographs underwater. Instead, you should use additional sources of lighting as well. These additional sources will lighten the background and ensure that your image is captured in all its glory.

7. Natural

When making any decisions about lighting, it's essential that you make it look as natural as possible. Too much light can make the subject look unrealistic, which won't result in a good photo.

Popular Cameras for High Quality Photos: