Making a Outdoor Security Camera for Cheap

An outdoor security camera is a great way to protect your property from danger. These cameras work in two ways. Firstly, they work as a deterrent to prevent people from intruding on your property. They also allow you to capture videos of people who do steal from your house, which is helpful when prosecuting.

The problem with most home security systems is that they are quite expensive. They normally require a monthly fee, and they are also quite difficult to install. An easier and cheaper way is to install your own camera.

Step 1: Choosing a Suitable Camera

The first thing that you should do is choose a camera which is suitable. There are plenty of different cameras to choose from. When looking for an outdoor camera, it's important that you choose one that is waterproof and able to cope with all the elements.

Some of the better cameras are wireless network cameras. This means that they can record to your computer without any wires. The only connection you need to worry about is power.

Step 2: Installing Your Camera

Once you have the right camera, it is then time to install it. Installing a camera is very easy. You simply need to put it somewhere that it can see whatever it is you are trying to protect. It's important that the view isn't obstructed by trees, walls or anything else that might get in the way.

You will need to find somewhere to plug your camera in. Most of these cameras come with power transformers which need to be plugged into a regular receptacle. This might require some special consideration so that you can find somewhere that it will reach. In the worst case scenario, you will need to install a new outlet.

If you have a wireless camera ,then no other cables should be required. However, if you have an older camera, then you will need to wire the audio and video wires into your recording device. This is very difficult to do, which is why wireless systems are becoming so popular. If your camera has a wireless receiver, then this needs to be connected to your computer or recording device so that you can start using the whole system.

Step 3: Using Your Camera

An Internet or IP camera works by setting up a web server on your homes network. This is known as an intranet site, which means that it can only be accessed from within your network. To access this, open up a browser and type in the IP address of the camera. This is typically 192.168.0.x, but it can follow different standards.

You can also perform an additional setup on the camera to stream the video to other places. Although by default the cameras normally only allow access from within the local network, it's possible to allow access from anywhere in the world.

If you have recording software, then install this and set it up to use your camera to record video. It's possible to connect several cameras and record all of these streams at once. The video streams can then be searched through to review what happens throughout the time.