How to Use Photography Reflectors with Natural Light

In a studio, you may overlook the significance of photography reflectors. You probably turn to powered lights because you'll have much more control over the lights and will be able to change the brightness directly. There are, however, plenty of times when you really should investigate photography reflectors. These can make your life much easier because they are simpler to transport and use.

Step 1: Choosing Reflectors

A reflector is simply designed to collect light and bounce it back up. These are typically used to cast light on the subject and minimise shadows. There are various reflectors available, from professional designs and ones which are much cheaper. It's even possible to make your own if you wish. Anything which is white will reflect the light sufficiently without casting shadows.

Step 2: Positioning Reflectors

The position of the reflector will depend on where the light is coming from. Normally the reflector will be located below the subject, which will then bounce the light back up. This will lighten the image without the need of actually using artificial lights.

Step 3: Testing

Once you have positioned the light, you then need to test it to see how it looks. Look through the viewfinder of your camera to see how everything is lined up. Also, spend some time adjusting the angle and the location of the reflector to change how it will look. You can then take some test shots to ensure everything is perfect.

Using photo reflectors with natural light is perfect for working outdoors. This means that there's no need to carry lights around with you or waste a lot of time trying to set them up.