6 Memory Card Secrets of the Pros

Virtually all digital cameras will use a memory card to store photos on, which makes using them much more convenient. The card can be removed from the camera easily and then put into a card reader on your computer. Thanks to this you will be able to easily load the photos onto your computer without needing to connect the camera.

When using memory cards there are a number of different tips which can make them last longer and also make using them much more convenient. Following some of these secrets of the pros will ensure that your photos are safe and you can continue shooting no matter what happens.

1. Don't Rely on One Card

One common mistake for many amateur digital photographers to make is to buy the largest memory card they can find. Currently, most digital memory cards go up to a maximum of 32GB. This sounds like a great idea because the bigger the card, the more photos you will be able to fit onto it.

By choosing a big card you will be able to minimize the number of times that you need to change the cards. However if your card packs up then you will end up losing hundreds of photos. It's much safer if you use a greater number of smaller memory cards. If you choose several 4GB cards for example then even if one breaks you will only lose a small number of photos.

2. Leaving Space

When taking photos on a memory card you will need to ensure that you don't fill it up. The camera will estimate the number of photos that can be fit onto the memory card. If it gets this wrong then it may corrupt the contents of your memory card. Always leave around 5 shots at the end of the memory card to avoid this being a problem.

3. Protecting Memory Cards

Memory cards can seem like pretty simple pieces of plastic, however there are actually some sensitive components inside. If these cards get damaged then they will not be able to store any photos because the card will be damaged. You might also end up losing any photos that are stored on your memory card.

When possible, store the memory card in the protective plastic case that they came with. If you don't already have the case then these can also be purchased.

4. Formatting Cards

If you buy a memory card which is pre-formatted then you might just pop it in your camera and start shooting. This could however create errors if the cameras file system is not compatible with the file system used on the card. Put the card in your camera and format it using the camera. This will ensure that the card is compatible with the camera and that it will work properly and be reliable.

5. Caring for Cards

When caring for your SD or other flash memory cards you must make sure that you don't touch the contacts. If you touch the contacts then this can cause damage to the card.

6. Changing Cards

When changing memory cards you should do so in a clean and dry environment. It's never a good idea to change the memory cards on the beach or in an environment which is very dusty because this could get inside your camera and cause damage.

Popular Cameras for High Quality Photos: