Production Lighting: How To Do Cameo Lighting

Cameo lighting is important in certain types of production. This effect is a spotlight which picks out a single person. This is a very popular effect, and it's worth learning how to do it properly. The cameo lighting effect can be used for a number of different reasons. It can be used to create an effect as if a light is shining down from heaven. It can also be used in several other ways, including picking out the main character.

You should familiarize yourself with a lot of different types of lighting schemes. These lighting schemes can be used in a number of different ways to create different effects. Over time and as you become more experienced, it should be possible to expand your repertoire of lighting techniques.

Step 1: Preparing Equipment

Cameo lighting is an interesting lighting technique which uses a spotlight to highlight a particular subject in the film. This is a harsh technique and so it requires the use of quite bright lights.

To do this effect correctly, you will need to use a tripod. This will make it much easier to set up the camera and keep everything steady. When filming a cameo lighting effect, you will also find it difficult to move the camera around because the stand will be positioned very close to the subject. You will also need to use backgrounds to create the effect and make sure that it looks correct.

Step 2: Positioning Equipment

The spot light is positioned above the subject and shines down on her. This is designed to create a nice angelic vibe. This looks as if God is shining a light down on her. The lights need to be positioned around 6 or 7 feet above the subject and pointing down at a very high angle. This will mean that the lights are virtually hanging down.

It's important to use powerful lights which pick out the subject. Using softer lights simply won't provide a good enough effect. You might need to do some experimentation with this, however, to ensure that the lights are bright enough to light up the subject while not being too bright to burn her out completely.

Step 3: Understanding Positions and Angles

The stand should be positioned as close to the subject's body as possible and much higher than her head. This can be a problem in some situations when you want to film a large area of the set. However, it can be overcome by using overhead lighting.

The light needs to be angled straight down or as far as it will go. It also needs to point directly at the subject. This casts shadows, so although the light needs to be intense, it can't be too intense.

Step 4: Experimentation

All of these effects are challenging to get right. You will need to invest plenty of time to perfect these lighting effects and do them properly. When you get more experienced, however. it should be very easy to use this effect whenever you need it. It's going to take time to make sure that you get this effect right.

Popular P&S Cameras for High Quality Photos: