Ink System and Printhead
Let's take a look under the hood. The MP610 features an intelligent ink-management system that uses individual ink tanks for each color. You replace only the color that runs out rather than an entire multicolor cartridge. A red LED lights up when the ink tank is properly installed. The MP610 uses 5 color inks consisting of cyan, magenta, yellow, black inks and a pigment black ink. The pigment-based black ink is used to make laser-quality text and the CMYK inks are ChromaLife100 compliant.
The ChromaLife100 system combines FINE printheads the ChromaLife100 ink
technology to create prints can resist fading for up to 100 years when stored in an archival quality photo
album. The 100-year-lifespan rivals that of many traditional film based photos, long
considered by consumers to be the benchmark for image permanence. Prints produced on Canon
Photo Paper Pro with ChromaLife100 inks have an up to ten-year gas fastness when exposed to
open air. ChromaLife100 prints, when created using Canon Photo Paper Pro or Photo Paper Plus
Glossy, have up to 30-year light fastness when displayed under glass.
The MP610 printhead employs Canon's FINE (Full-photolithography Inkjet Nozzle Engineering) technology. The 4,608 nozzle FINE advanced print head technology is one of the keys to the impressive speed and high photo quality in PIXMA photo printers. FINE technology uses a ground-breaking high-performance, multi-nozzle print engine that ejects consistent and microscopic (1-picoliter) ink droplets.
Not only can the user replace the individual ink tanks, you can also replace the
entire print head if necessary. (Replacement print heads are available from Canon
Service after it is determined that a replacement is necessary.) Epson printers
require a trip to the service center when they encounter a problem as the print head
is permanently mounted.
Dual Color Gamut Processing Technology takes advantage of Canon's vast experience in office imaging
equipment. By taking into account factors such as human vision characteristics and the type of print paper
being used, this technology independently controls hue and brightness to achieve the same color balance
as the original. Fully utilizing the color-reproduction capabilities of scanners and printers, Dual Color
Gamut Processing Technology makes possible the creation of copies with rich gradation and minimal
Color development based on Canon's Color Management Technology, which incorporates human color preference factors,
is reflected in the company's inkjet printers as "Canon Digital Photo Color." Through a wide variety of panel tests,
Canon improved gray shades, contrast, and saturation, making possible vivid expression of skin tones and landscapes
with low-chromatic colors pleasing to the eye.
Optical ink sensors automatically monitor all ink color levels and communicate with your computer, giving you a pop-up message indicating exactly what colors are running low. You can also check the status of the ink tanks at any time using the Status Monitor of the driver as shown above.
Canon's optical low ink detection system prevents wasted printouts by
notifying you via the Printer Status Monitor before any ink tank becomes
empty, so you'll never unexpectedly run out of ink in the middle of a job again.
A light beam shines through a prism located at the bottom of each ink tank. When there is sufficient ink, the light is detected by the sensor. When only about 20% of ink is left in any of the ink tanks, the light beam is refracted, triggering the sensor which tells the printer driver to display a low ink tank notification for that ink tank.
Note: All photographs and page content
Copyright © 2007 Steve's Digicam Online, Inc.
Nothing on this page may be used, distributed or
copied without the author's prior permission.