

|
Excuse the poor quality of these screen captures, the HP935 does not output video
in record mode so we had to photograph them off of the LCD monitor
This is a typical record screen when using the color LCD as the viewfinder. At the top
there are icons for flash mode, image size/quality, number of pictures remaining, and
battery condition.
Pressing the Focus or Flash buttons on the top will bring up a status screen on the
LCD monitor to show the changes made.
Record menu page 1 options:
White Balance - Auto, Sun, Shade, Tungsten, Fluorescent, Manual and Help (Displays info. on White Balance modes) AE Metering - Center, Spot, Average and Help (Displays info. on the different metering modes) ISO Speed - Auto, 100, 200, 400 and Help (Displays info. on ISO settings) Color - Full color, B&W, Sepia and Help Red_Eye - On/Off and Help
Record menu page 2 options:
Compression - Good, Better, Best and Help Saturation - Low, Medium, High and Help Contrast - Low, Medium, High and Help Setup - See below
Setup menu options:
Date & Time - Set Date and Time USB - Digital camera or Disk drive TV - NTSC or PAL Language - Choose from 5 different Languages
The PhotoSmart 935 captures up to 120-second video clips at 20 frames per second with audio at 288 x 208 resolution in the MPEG-1 format. As with most digicams that record sound with video, the zoom cannot be used while recording but can be preset before recording begins. |
764,283,425
Note: All photographs and page content
Copyright © 2003 Steve's Digicam Online, Inc.
Nothing on this page may be used, distributed or
copied without the author's prior permission.