This is the sight that greets you when you lift the cover on the i850 printer.
Rather than seeing the usual color and black cartridges there's this
impressive looking print head assembly with separate ink tanks.
Here's the print head with its four ink tanks (Black, Cyan, Magenta, Yellow). These are dye-based inks, not the pigment type.
Not only can the user replace the individual ink
tanks but you can also replace the entire print head if necessary. Epson
printers require a trip to the service center if they encounter a print head
problem. Unlike the newer Epson cartridges, the Canon ink tanks have no embedded
computer chips and appear to be easy to refill.
Optical ink sensors automatically monitor all ink color levels and communicate with your computer--giving you a pop-up message indicating exactly what colors are running low. You can also check the status of the ink tanks at any time using the Status Monitor of the driver as shown above.
Canon's optical low ink detection system prevents wasted printouts by
notifying you via the Printer Status Monitor before any ink tank becomes
empty, so you'll never unexpectedly run out of ink in the middle of a job again.
A light beam shines through a prism located at the bottom of each ink tank. When
there is sufficient ink, the light is detected by the sensor. When only about
20% of ink is left in any of the ink tanks, the light beam is refracted,
triggering the sensor which tells the printer driver to display a low ink tank
notification for that ink tank.
UK visitors BCI3EC INK TANK CYAN F/ BC30/30E/33/33E/S600/I850
Note: All photographs and page content
Copyright © 2002 Steve's Digicam Online, Inc.
Nothing on this page may be used, distributed or
copied without the author's prior permission.