When you select Playback mode the last picture taken is displayed. You can move backward or forward through the images using the LEFT and RIGHT buttons. The amount of overlay information displayed is controlled by pressing the DISP button. This frame shows the default information, across the bottom is 14/23 which means image 14 of 23 total. Superfine/Large image and the time and date it was captured.

Pressing the DISP button again brings up further icons to indicate the capture mode (auto, manual, movie), flash mode, exposure compensation, white balance, ISO speed and metering. In the upper right corner is the exposure histogram.

If you press the DISP button again all of the overlay information is removed. This is good for when you are showing the pictures on the TV and don't want the info displayed.

You can quickly search through stored images using the Index playback function which is actuated by pressing the Wide zoom control button. Nine thumbnail size images will be displayed and you can select one using the LEFT or RIGHT buttons and then pressing the Telephoto zoom button. Pressing the Wide button again while put you in jump mode where you can backward or forward a page at a time.

The image can be magnified up to 10x in ten steps by pressing the telephoto zoom button. Once the image is enlarged you can move around inside of it using the 4-way selector buttons.

Movie clips can be played in the camera but to play the audio the A/V cable is needed to play via a TV as the S200 has no onboard speaker. Of course, download of the image into your PC also facilitates audio . Here is the full info screen shown before playing a movie clip.

Extended "info" may also be displayed for the movie clips.

Pressing the MENU button brings up this page of options. Protect or unprotect image(s), rotate image for display on TV (Not necessary if you shot the picture with the Auto Rotate option enabled), Erase all will delete ALL the images, Slide Show is for automated playback on a TV, Print Order lets you set the DPOF printing information.

The Setup sub-menu lets you to turn the Beep sounds on/off, enable the Auto Power Down option (off, on), set the time and date in the internal clock, format the CF card, set the menu language, and specify the video out format (NTSC or PAL).