This is the sight that greets you when you lift the cover on the S800 printer.
Rather than seeing the usual color and black cartridges there's this most
impressive looking printhead assembly with six separate ink tanks.
Here's the QY6-0035 Printhead with its six ink tanks (Black, Photo Cyan, Photo Magenta, Cyan, Magenta, Yellow) used in the Canon S800 Photo printer.
Not only can the user replace the individual ink
tanks but you can also easily replace the entire printhead if necessary. Epson
printers require a trip to the service center if they encounter a printhead
Optical ink sensors automatically monitor all ink color levels and communicate with your computer--giving you a pop-up message indicating exactly what colors are running low. You can also check the status of the ink tanks at any time using the Ink Info page of the driver as shown above.
Canon's optical low ink detection system prevents wasted printouts by
notifying you via the Printer Status Monitor before any ink tank becomes
empty, so you'll never unexpectedly run out of ink in the middle of a job again.
A light beam shines through a prism located at the bottom of each ink tank. When
there is sufficient ink, the light is detected by the sensor. When only about
20% of ink is left in any of the ink tanks, the light beam is refracted,
triggering the sensor which tells the printer driver to display a low ink tank
notification for that ink tank.
Note: All photographs and page content
Copyright © 2001 Steve's Digicam Online, Inc.
Nothing on this page may be used, distributed or
copied without the author's prior permission.